Device Information
 
 
ISL1539A Printer Friendly Version
Dual Port VDSL2 Line Driver
 
Features DescriptioniSim Design Simulation
Technical DocumentationTools And Support
Pricing / SamplesRelated Devices
 
Buy Direct from Intersil
 Order Samples
 ISL1539AIRZOrder Samples
 Buy Parts
 Contact Sales
 Buy Eval Boards
 Contact Sales


 Distributor Inventory
ISL1539AIRZDetails
ISL1539AIRZ-T13Details
Datasheet
Adobe Acrobat Document ISL1539A
Dual Port VDSL2 Line Driver
BW (MHz)240
SR (V/μs)3000
VS (min) (V)±7.5
VS (max) (V)±12.6
IS (per amp) (mA)13.5
Noise VN (nV/√Hz)4
IBIAS (μA)8
VOS (max) (mV)8
# of Devices/ Channels2
IOUT (mA)600
VOUT (V)10.9
Rail-to-Rail InputN
Rail-to-Rail OutputN
PSRR (dB)97
Thermal ShutdownN
Total Harmonic Distortion (dB)89
Gain AV (min)10
EnableN
 

Product Information

Key Features
  • 360mA Output Drive Capability
  • 41.8VP-P Differential Output Drive into 100Ω
  • -89dBc THD @ 1MHz 2VP-P
  • -65dBc MTPR (VDSL 8b Profile)
  • High Slew Rate of 3000V/μs Differential
  • Bandwidth (240MHz @ AV-DIFF = 10)
  • Supply Current Control Pins
  • Port Separation
    • 78dB @ 500kHz
    • 70dB @ 1MHz
    • 60dB @ 4MHz
  • Pb-Free (RoHS Compliant)
Description

The ISL1539A provides 4 internal wideband op amps intended to be used as two pairs of differential line drivers. The ISL1539As high bandwidth, 240MHz, and ultra low distortion, -89dBc @ 1MHz, 2VP-P, support the demanding MTPR requirements of emerging VDSL2 line driver designs. Less demanding requirements can be met at very low quiescent powers using the supply current adjustment features.

Each of the 4 internal op amps is a wideband current feedback amplifier offering very high slew rate intrinsic to that design using low quiescent current levels. Each of the two pair of amplifiers (ports) can also be power optimized to the application using two external quiescent control logic pins. Full power is nominally 27.2mA/port with options of medium power cutback to 23mA/port, a low power condition at 13.5mA/port, and an off state at <0.5mA/port. Added quiescent power flexibility is provided through an external IADJ pin. Grounding the pin gives the nominal currents listed above while inserting a resistor from this pin to ground can be used to scale each of the settings downward.

High power push/pull line driver applications as illustrated in the example below are best supported using a low headroom, high output current device. On ±12V supplies, the ISL1539A offers a 1.1V headroom with >360mA peak output current. Driving differentially this gives >41.8VP-P swing to as low as 58Ω differential load. High SFDR operation is also supported for supplies as low as ±7.5V. Intended to be used as differential pairs, this two port device includes special circuitry to minimize common mode loop peaking while also reducing the common mode output noise spectrum. That circuitry links the two sides of each port, precluding their application as individual amplifiers.

Pricing / Packaging / Samples / Ordering

 iBuy direct from Intersil iBuy direct - out of stock Request samples
 Check distributor inventoryGreen/Pb(Lead free) Device Available in RoHS/Pb-Free 
Part No.Design-In
Status
Temp.PackageMSLPrice
US $
PB Free
ISL1539AIRZ Active Ind 24 Ld QFN 1 1.72 PB Free Disti-Buy Sample
ISL1539AIRZ-T13 Active Ind 24 Ld QFN T+R 1 1.72 PB Free Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing

Technical Documentation

Application Note(s):
Datasheet(s):
Technical Brief(s):
Technical Homepage:
Tools And Support
iSim Design Simulation
No Models Available
Application Block Diagrams
Applications
  • 8MHz and 17MHz VDSL2 Profiles
  • ADSL2+
  Related DevicesParametric Table   Parametric Table
 EL1516 Dual Ultra Low Noise Amplifier
Not Recommended for New Designs, Recommended Replacement Part EL5236, or EL5237 with ENABLE pin
 
 EL1516A Dual Ultra Low Noise Amplifier
Not Recommended for New Designs, Recommended Replacement Part EL5237, or EL5236 without ENABLE pin
 
 ISL1535 Dual Channel Central Office ADSL2+ Line Driver 
 ISL1536 Dual Channel Central Office ADSL2+ Line Driver 
 ISL1557 xDSL Differential Line Driver 
 ISL1557A 12V xDSL Differential Line Driver with Enhanced Output Protection 
 ISL1571 Power Line Communication (PLC) 
 ISL1572 Power Line Communication (PLC) 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2011. Intersil Americas Inc. All rights reserved.