Device Information
 
 
ISL31472E Printer Friendly Version
Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers
 
Features DescriptioniSim Design Simulation
Technical DocumentationTools And Support
Pricing / SamplesRelated Devices
 
Buy Direct from Intersil
 Order Samples
 ISL31472EIBZOrder Samples
more
 Buy Parts
 ISL31472EIBZBuy Direct
more
 Buy Eval Boards
 Contact Sales


 Distributor Inventory
ISL31472EIBZDetails
ISL31472EIBZ-TDetails
ISL31472EIBZ-T7ADetails
ISL31472EIPZDetails
Datasheet
Adobe Acrobat Document ISL31472E
Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers
# of RS-485 Tx1
# of RS-485 Rx1
Fault Voltage Level (V)±60
Common Mode Voltage Range (V)±15
RS-485 Devices Allowed on Bus128
Half/Full Duplex RS-485Half
High ESDNo
Hot PlugYes
RS-485 Data Rate (Mbps).25
Slew Rate LimitedYes
Tx/Rx EnableYes
ICC (mA)2.3
SHDN ICC (μA)50
VCC Range (V)4.5 to 5.5
VL PinNo
 

Product Information

Key Features
  • Fault Protected RS-485 Bus Pins: up to ±60V
  • Extended Common Mode Range: ±15V Larger Than Required for RS-485
  • 1/4 Unit Load for up to 128 Devices on the Bus
  • High Transient Over Voltage Tolerance: ±80V
  • Full Fail-safe (Open, Short, Terminated) RS-485 Receivers
  • High Rx IOL for Opto-Couplers in Isolated Designs
  • Hot Plug Circuitry - Tx and Rx Outputs Remain Three-State During
    Power-up/Power-down
  • Choice of RS-485 Data Rates: 250kbps to 15Mbps
  • Low Quiescent Supply Current: 2.3mA Ultra Low Shutdown Supply Current: 10μA
  • Pb-Free (RoHS Compliant)
Description

The ISL31470E, ISL31472E, ISL31475E, ISL31478E are fault protected, extended common mode range differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 bus pins (driver outputs and receiver inputs) are protected against overvoltages up to ±60V. Additionally, these transceivers operate in environments with common mode voltages up to ±15V (exceeds the RS-485 requirement), making this RS-485 family one of the more robust on the market.

Transmitters deliver an exceptional 2.5V (typical) differential output voltage into the RS-485 specified 54Ω load. This yields better noise immunity than standard RS-485 ICs, or allows up to six 120Ω terminations in star topologies.

Receiver (Rx) inputs feature a Full Fail-Safe design which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven (idle) bus. Rx outputs feature high drive levels - typically 15mA @ VOL = 1V (to ease the design of opto-coupled isolated interfaces).

Half duplex (Rx inputs and Tx outputs multiplexed together) and full duplex pinouts are available.

For an RS-485 family with a ±25V extended common mode range, please see the ISL31490E and ISL31480E data sheets.

Pricing / Packaging / Samples / Ordering

 iBuy direct from Intersil iBuy direct - out of stock Request samples
 Check distributor inventoryGreen/Pb(Lead free) Device Available in RoHS/Pb-Free 
Part No.Design-In
Status
Temp.PackageMSLPrice
US $
PB Free
ISL31472EIBZ Active Ind 8 Ld SOIC 2 1.05 PB Free Buy Direct Disti-Buy Sample
ISL31472EIBZ-T Active Ind 8 Ld SOIC T+R 2 1.05 PB Free Disti-Buy  
ISL31472EIBZ-T7A Active Ind 8 Ld SOIC T+R 2 1.16 PB Free Disti-Buy  
ISL31472EIPZ Active Ind 8 Ld PDIP N/A 1.05 PB Free Buy Direct Disti-Buy Sample
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing

Technical Documentation

Datasheet(s):
Technical Homepage:
Tools And Support
iSim Design Simulation
No Models Available
Design Model(s):
Applications
  • Utility Meters/Automated Meter Reading Systems
  • High Node Count Systems
  • PROFIBUS™ and Field Bus Networks, and Factory Automation
  • Security Camera Networks
  • Building Lighting and Environmental Control Systems
  • Industrial/Process Control Networks
  Related DevicesParametric Table   Parametric Table
 ISL31470E Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers 
 ISL31475E Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers 
 ISL31478E Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers 
 ISL31483E Fault Protected, Extended CMR, RS-485/RS-422 Transceivers with Cable Invert 
 ISL31485E Fault Protected, Extended CMR, RS-485/RS-422 Transceivers with Cable Invert 
 ISL31490E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range 
 ISL31491E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range 
 ISL31492E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range 
 ISL31493E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range 
 ISL31495E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range 
 ISL31496E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range 
 ISL31498E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range 
 ISL3150E RS-485/RS-422 Differential Transceiver 
 ISL3152E 5V, RS-485/RS-422 Differential Transceiver 
 ISL3153E 5V Full Duplex, 1Mbps Slew Rate Limited, IEC61000 ESD Protected with 2.4V Vod RS-485/RS-422 Transceiver 
 ISL3155E 5V, RS-485/RS-422 Transceiver with 16kV ESD Protection 
 ISL3158E 5V, Full Fail-safe, RS-485/RS-422 Transceiver with ESD Protection 
 ISL3159E ±15kV ESD Protected, +125°C, 40Mbps, 5V, PROFIBUS®, Full Fail-safe, RS-485/RS-422 Transceivers 
 ISL32470E Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers with 16.5kV ESD 
 ISL32472E Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers with 16.5kV ESD 
 ISL32475E Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers with 16.5kV ESD 
 ISL32478E Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers with 16.5kV ESD 
 ISL32483E Fault Protected, Extended CMR, RS-485/RS-422 Transceivers with Cable Invert and ±16.5kV ESD 
 ISL32485E Fault Protected, Extended CMR, RS-485/RS-422 Transceivers with Cable Invert and ±16.5kV ESD 
 ISL32490E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V CMR and ESD Protection 
 ISL32492E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V CMR and ESD Protection 
 ISL32493E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V CMR and ESD Protection 
 ISL32495E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V CMR and ESD Protection 
 ISL32498E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V CMR and ESD Protection 
 ISL3259E ±15kV ESD Protected, 100Mbps, 5V, PROFIBUS®, Full Fail-safe, RS-485/RS-422 Transceivers 
 ISL4489E 5V, Full Duplex, 250kbps Slew Rate Limited With Enable, ±15kV ESD Protected, RS-485/RS-422 Transceiver 
 ISL81483 5V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL81487 5V, Half Duplex, 5Mbps, RS-485/RS-422 Transceiver 
 ISL81487E 5V, Half Duplex, 5Mbps, ±15kV ESD Protected, RS-485/RS-422 Transceiver 
 ISL81487L 5V, Half Duplex, 250kbps Slew Rate Limited, ±15kV ESD Protected, RS-485/RS-422 Transceiver 
 ISL83080E ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers 
 ISL83082E ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers 
 ISL83083E ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers 
 ISL83084E ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers 
 ISL83085E ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers 
 ISL83088E ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers 
 ISL83483 3.3V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL83485 3.3V, Half Duplex, 10Mbps, RS-485/RS-422 Transceiver 
 ISL83488 3.3V, Full Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL83490 3.3V, Full Duplex, 10Mbps, RS-485/RS-422 Transceiver 
 ISL83491 3.3V, Full Duplex, 10Mbps With Enable, RS-485/RS-422 Transceiver 
 ISL8483 5V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL8483E ESD Protected to ±15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL8485 5V, Half Duplex, 5Mbps, RS-485/RS-422 Transceiver 
 ISL8485E ESD Protected to ±15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL8487 5V, Half Duplex, 250kbps Slew Rate Limited, 1/4 Unit Load, RS-485/RS-422 Transceiver 
 ISL8487E 5V, Half Duplex, 250kbps Slew Rate Limited, ±15kV ESD Protected, 1/8 Unit Load, RS-485/RS-422 Transceiver 
 ISL8488 5V, Full Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL8490 5V, Full Duplex, 5Mbps, RS-485/RS-422 Transceiver 
 ISL8491 5V, Full Duplex, 5Mbps With Enable, RS-485/RS-422 Transceiver 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2011. Intersil Americas Inc. All rights reserved.