ISL31498E ±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range

ISL31498E

±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range

	Features Description		iSim Design Simulation
	Technical Documentation		Tools And Support
	Pricing / Samples		Related Devices

Buy Direct from Intersil

	Order Samples
	ISL31498EIBZ
	ISL31498EIUZ
more

	Buy Parts
	Contact Sales

	Buy Eval Boards
	Contact Sales

	Distributor Inventory

	ISL31498EIBZ	Details
	ISL31498EIBZ-T	Details
	ISL31498EIUZ	Details
	ISL31498EIUZ-T	Details

Datasheet
	ISL31498E
	±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range

# of RS-485 Tx

# of RS-485 Rx

Fault Voltage Level (V)

±60

Common Mode Voltage Range (V)

±25

RS-485 Devices Allowed on Bus

128

Half/Full Duplex RS-485

Half

High ESD

RS-485 Data Rate (Mbps)

Tx/Rx Enable

Yes

ICC (mA)

2.3

SHDN ICC (μA)

VCC Range (V)

4.5 to 5.5

VL Pin

VCC (min) (V)

4.5

VCC (max) (V)

5.5

Product Information

Key Features

Fault Protected RS-485 Bus Pins: Up to ±60V
Extended Common Mode Range: ±25V More than Twice the Range Required for
RS-485
1/4 Unit Load for up to 128 Devices on the Bus
High Transient Overvoltage Tolerance: ±80V
Full Fail-safe (Open, Short, Terminated) RS-485 Receivers
High Rx I_OL for Opto-Couplers in Isolated Designs
Hot Plug Circuitry - Tx and Rx Outputs Remain Three-State During
Power-up/Power-down
Choice of RS-485 Data Rates: 250kbps to 15Mbps
Low Quiescent Supply Current: 2.3mA
Ultra Low Shutdown Supply Current: 10μA
Pb-Free (RoHS Compliant)

Description

The ISL31490E, ISL31491E, ISL31492E, ISL31493E, ISL31495E, ISL31496E, ISL31498E are fault protected, 5V powered, differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are protected against faults up to ±60V. Additionally, the extended common mode range allows these transceivers to operate in environments with common mode voltages up to ±25V (>2x the RS-485 requirement), making this RS-485 family one of the most robust on the market.

Transmitters deliver an exceptional 2.5V (typical) differential output voltage into the RS-485 specified 54Ω load. This yields better noise immunity than standard RS-485 ICs, or allows up to six 120Ω terminations in star network topologies.

Receiver (Rx) inputs feature a Full Fail-Safe design which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven (idle) bus. Rx outputs have high drive levels - typically 15mA @ V_OL = 1V (for opto-coupled, isolated applications). Half duplex (Rx inputs and Tx outputs multiplexed together) and full duplex pinouts are available.

For fault protected or wide common mode range devices with cable invert (polarity reversal) or logic supply (V_L) pins, please see the ISL31480E data sheet.

Pricing / Packaging / Samples / Ordering

iBuy direct from Intersil	iBuy direct - out of stock	Request samples
Check distributor inventory	Available in RoHS/Pb-Free

	Part No.	Design-In Status	Temp.	Package	MSL	Price US $

	ISL31498EIBZ	Active	Ind	8 Ld SOIC	2	1.50

	ISL31498EIBZ-T	Active	Ind	8 Ld SOIC T+R	2	1.50

	ISL31498EIUZ	Active	Ind	8 Ld MSOP	1	1.50

	ISL31498EIUZ-T	Active	Ind	8 Ld MSOP T+R	1	1.50

The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing

Technical Documentation

Datasheet(s):
±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range
Technical Homepage:
Interface ICs

Tools And Support
iSim Design Simulation
No Models Available

Applications

Utility Meters/Automated Meter Reading Systems
High Node Count Systems
PROFIBUS™ and Field Bus Networks, and Factory Automation
Security Camera Networks
Building Lighting and Environmental Control Systems
Industrial/Process Control Networks

Related Devices

Parametric Table

	ISL31470E		Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers
	ISL31472E		Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers
	ISL31475E		Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers
	ISL31478E		Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers
	ISL31483E		Fault Protected, Extended CMR, RS-485/RS-422 Transceivers with Cable Invert
	ISL31485E		Fault Protected, Extended CMR, RS-485/RS-422 Transceivers with Cable Invert
	ISL31490E		±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range
	ISL31491E		±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range
	ISL31492E		±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range
	ISL31493E		±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range
	ISL31495E		±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range
	ISL31496E		±60V Fault Protected, 5V, RS-485/RS-422 Transceivers with ±25V Common Mode Range
	ISL3150E		RS-485/RS-422 Differential Transceiver
	ISL3152E		5V, RS-485/RS-422 Differential Transceiver
	ISL3153E		5V Full Duplex, 1Mbps Slew Rate Limited, IEC61000 ESD Protected with 2.4V Vod RS-485/RS-422 Transceiver
	ISL3155E		5V, RS-485/RS-422 Transceiver with 16kV ESD Protection
	ISL3156E		16kV ESD Protected, RS-485/RS-422 Differential Transceiver with Full Fail-safe Rx
	ISL3158E		5V, Full Fail-safe, RS-485/RS-422 Transceiver with ESD Protection
	ISL3159E		±15kV ESD Protected, +125°C, 40Mbps, 5V, PROFIBUS®, Full Fail-safe, RS-485/RS-422 Transceivers
	ISL3259E		±15kV ESD Protected, 100Mbps, 5V, PROFIBUS®, Full Fail-safe, RS-485/RS-422 Transceivers
	ISL3280E		±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23 Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers
	ISL3281E		±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23 Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers
	ISL3282E		±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, TDFN Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers
	ISL3283E		±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23 Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers
	ISL3284E		±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23 Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers
	ISL4485E		5V, Half Duplex, 20Mbps, ±15kV ESD Protected, RS-485/RS-422 Transceiver
	ISL4486		5V, Half Duplex, 40Mbps,RS-485/RS-422 Transceiver
	ISL4491E		±15kV ESD Protected, 1/8 Unit Load, 5V, Low Power, 15Mbps, Full Duplex, RS-485/RS-422 Transceivers
	ISL81483		5V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver
	ISL81485		5V, Half Duplex, 30Mbps, RS-485/RS-422 Transceiver
	ISL81486		5V, Half Duplex, 30Mbps, RS-485/RS-422 Transceiver
	ISL81487		5V, Half Duplex, 5Mbps, RS-485/RS-422 Transceiver
	ISL81487E		5V, Half Duplex, 5Mbps, ±15kV ESD Protected, RS-485/RS-422 Transceiver
	ISL81487L		5V, Half Duplex, 250kbps Slew Rate Limited, ±15kV ESD Protected, RS-485/RS-422 Transceiver
	ISL83080E		±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers
	ISL83082E		±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers
	ISL83083E		±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers
	ISL83085E		±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers
	ISL83086E		±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers
	ISL83088E		±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers
	ISL8483		5V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver
	ISL8483E		ESD Protected to ±15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers
	ISL8487		5V, Half Duplex, 250kbps Slew Rate Limited, 1/4 Unit Load, RS-485/RS-422 Transceiver
	ISL8487E		5V, Half Duplex, 250kbps Slew Rate Limited, ±15kV ESD Protected, 1/8 Unit Load, RS-485/RS-422 Transceiver