ISL54227 High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection

ISL54227

High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection

	Features Description		iSim Design Simulation
	Technical Documentation		Tools And Support
	Pricing / Samples		Related Devices

Buy Direct from Intersil

	Order Samples
	ISL54227IRTZ
	ISL54227IRUZ-T7A
more

	Buy Parts
	ISL54227IRTZ
	ISL54227IRUZ-T
	ISL54227IRUZ-T7A
more

	Buy Eval Boards
	Contact Sales

	Distributor Inventory

	ISL54227IRTZ	Details
	ISL54227IRTZ-T	Details
	ISL54227IRUZ-T	Details
	ISL54227IRUZ-T7A	Details

Datasheet
	ISL54227
	High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection

Configuration

HS/FS

Switch Control

Logic Level

BW High (MHz)

790

BW Full (MHz)

790

V_DD (V)

2.7 to 5.25

I_S (μA)

Product Information

Key Features

High-Speed (480Mbps) and Full-Speed (12Mbps) Signaling Capability per USB 2.0
1.8V Logic Compatible (2.7V to +3.6V supply)
Alarm Overvoltage Indicator Output
Charger Interrupt Indicator Output
Low Power State
Power OFF Protection
COM Pins Overvoltage Detection and Protection for +5.25V and -5V Fault Voltages
-3dB Frequency: 790MHz
Low ON Capacitance @ 240MHz: 2pF
Low ON-Resistance: 3.5Ω
Single Supply Operation (V_DD): 2.7V to 5.25V
Available in μTQFN and TDFN Packages
Pb-Free (RoHS Compliant)
Compliant with USB 2.0 Short Circuit and Overvoltage Requirements without Additional External Components

Description

The Intersil ISL54227 is a single supply, dual SPST (Single Pole/Single Throw) switch that is configured as a DPST. It can operate from a single 2.7V to 5.25V supply. The part was designed for switching or isolating a USB high-speed source or a USB high-speed and
full-speed source in portable battery powered products.

The 3.5Ω SPST switches were specifically designed to pass USB full speed and USB high speed data signals. They have high bandwidth and low capacitance to pass USB high speed data signals with minimal distortion.The device has two logic control input pins (OE and LP) to control the SPST switches.

The ISL54227 has OVP detection circuitry on the COM pins to open the SPST switches when the voltage at these pins exceeds 3.8V or goes negative by -0.45V. It isolates fault voltages up to +5.25V or down to -5V from getting passed to the other side of the switch, thereby protecting the USB down-stream transceiver. It has an alarm indicator output pin (ALM) to indicate when the part is in the overvoltage condition.

The part has an interrupt (INT) output pin to indicate a 1 to 1 (high/high) state on the COM lines to inform the μprocessor when entering a dedicated charging port mode of operation.

The ISL54227 is available in 10 Ld 1.8mmx1.4mm μTQFN and 10 Ld 3mmx3mm TDFN packages. It operates over a temperature range of -40°C to +85°C.

Pricing / Packaging / Samples / Ordering

iBuy direct from Intersil	iBuy direct - out of stock	Request samples
Check distributor inventory	Available in RoHS/Pb-Free

	Part No.	Design-In Status	Temp.	Package	MSL	Price US $

	ISL54227IRTZ	Active	Ind	10 Ld TDFN	1	0.45

	ISL54227IRTZ-T	Active	Ind	10 Ld TDFN T+R	1	0.42

	ISL54227IRUZ-T	Active	Ind	10 Ld uTQFN T+R	1	0.42

	ISL54227IRUZ-T7A	Active	Ind	10 Ld uTQFN T+R	1	0.46

The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing

Technical Documentation

Datasheet(s):
High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection
Technical Homepage:
Intersil Analog Switches, Analog Multiplexers, and Crosspoint Switches

Tools And Support
iSim Design Simulation
No Models Available

Application Block Diagrams

Applications

MP3 and other Personal Media Players
Cellular/Mobile Phones, PDAs
Digital Cameras and Camcorders
USB Switching

Related Devices

Parametric Table

	ISL54200		USB 2.0 High/Full Speed Multiplexer
	ISL54216		USB 2.0 High-Speed/UART Dual SP3T (Dual 3 to 1 Multiplexer)
	ISL54220		High-Speed USB 2.0 (480Mbps) Multiplexer
	ISL54221		High-Speed USB 2.0 (480Mbps) Multiplexer
	ISL54222A		High-Speed USB 2.0 (480Mbps) Multiplexer
	ISL54224		High-Speed USB 2.0 (480Mbps) Multiplexer with Overvoltage Protection (OVP) and Overvoltage Indicator Output
	ISL54225		High-Speed USB 2.0 (480Mbps) Multiplexer with Overvoltage Protection (OVP)
	ISL54226		High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection
	ISL54228		High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP)
	ISL54230		Octal Multiprotocol Switch
	ISL54233		Wideband Differential 3:1 Multiplexer
	ISL76120		Automotive Grade USB 2.0 High/Full Speed Multiplexer