ISLA110P50 10-Bit, 500MSPS A/D Converter

ISLA110P50

10-Bit, 500MSPS A/D Converter

	Features Description		iSim Design Simulation
	Technical Documentation		Tools And Support
	Pricing / Samples		Related Devices

Buy Direct from Intersil

	Order Samples
	Contact Sales

	Buy Parts
	Contact Sales

	Buy Eval Boards
	Contact Sales

	Distributor Inventory

	ISLA110P50IR72EV1Z	Details
	ISLA110P50IRZ	Details
	KMB-001LEVALZ	Details
	KMB-FMC-EVALZ	Details

Datasheet
	ISLA110P50
	10-Bit, 500MSPS A/D Converter

Resolution (Bits)

Max. Conv. Rate (MSPS)

500

Channels

SNR (dBFS)

60.7

SFDR (dBc)

Power (mW)

441

±INL (Integral Non-Linearity) (LSB)

±DNL (Diff. Non-Linearity) (LSB)

.15

Analog Supply Voltage (V)

1.8

Digital Supply Voltage (V)

1.8

Product Information

Key Features

1.15GHz Analog Input Bandwidth
90fs Clock Jitter
Automatic Fine Interleave Correction Calibration
Multiple Chip Time Alignment Support via the Synchronous Clock Divider Reset
Programmable Gain, Offset and Skew Control
Over-Range Indicator
Clock Phase Selection
Nap and Sleep Modes
Two’s Complement, Gray Code or Binary Data Format
DDR LVDS-Compatible or LVCMOS Outputs
Programmable Test Patterns and Internal Temperature Sensor

Description

The ISLA110P50 is a low-power, high-performance, 500MSPS analog-to-digital converter designed with Intersil’s proprietary FemtoCharge™ technology on a standard CMOS process. The ISLA110P50 is part of a pin-compatible portfolio of 8, 10 and 12-bit A/Ds. This device is an upgrade of the KAD551XP-50 product family and is pin similar.

The device utilizes two time-interleaved 250MSPS unit A/Ds to achieve the ultimate sample rate of 500MSPS. A single 500MHz conversion clock is presented to the converter, and all interleave clocking is managed internally. The proprietary Intersil Interleave Engine (I2E) performs automatic fine correction of offset, gain, and sample time skew mismatches between the unit A/Ds to optimize performance. No external interleaving algorithm is required.

A serial peripheral interface (SPI) port allows for extensive configurability of the A/D. The SPI also controls the interleave correction circuitry, allowing the system to issue continuous calibration commands as well as configure many dynamic parameters.

Digital output data is presented in selectable LVDS or CMOS formats. The ISLA110P50 is available in a 72 Ld QFN package with an exposed paddle. Performance is specified over the full industrial temperature range (-40°C to +85°C).

Pricing / Packaging / Samples / Ordering

iBuy direct from Intersil	iBuy direct - out of stock	Request samples
Check distributor inventory	Available in RoHS/Pb-Free

	Part No.	Design-In Status	Temp.	Package	MSL	Price US $

	ISLA110P50IR72EV1Z	Active	-	Eval Board	N/A	Contact Us

	ISLA110P50IRZ	Active	Ind	72 Ld QFN	3	99.00

	KMB-001LEVALZ	Active	-	Eval Board	N/A	Contact Us

	KMB-FMC-EVALZ	Active	-	Eval Board	N/A	Contact Us

The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing

Technical Documentation

Application Note(s):
8-Bit to 16-Bit, 40MSPS to 500MSPS ADC Evaluation System ISLA11xP50 Output Data Timing and Synchronization Word Error Rate Measurement Methodology and Characterization Results
Datasheet(s):
10-Bit, 500MSPS A/D Converter
Evaluation Board(s):
FMC ADC Evaluation Board Users Guide High Speed ADCs Evaluation Platform Information and Software Download KDC5512_12H_12-50_14 Schematics and Layers KMB001 Schematics and Layers
Technical Homepage:
Data Converters

Tools And Support
iSim Design Simulation
No Models Available

Application Block Diagrams

Applications

Radar and Electronic/Signal Intelligence
Broadband Communications
High-Performance Data Acquisition

Related Devices

Parametric Table

	KAD2710C-10		10-Bit, 105MSPS Single-Channel ADC, LVCMOS Outputs The KAD5510P-12 offers better performance, lower power and a smaller package size than this device and is recommended for new designs.
	KAD2710C-17		10-Bit, 170MSPS Single-Channel ADC, LVCMOS Outputs The KAD5510P-17 offers better performance, lower power and a smaller package size than this device and is recommended for new designs.
	KAD2710C-21		10-Bit, 210MSPS Single-Channel ADC, LVCMOS Outputs The KAD5510P-21 offers better performance, lower power and a smaller package size than this device and is recommended for new designs.
	KAD2710C-27		10-Bit, 275MSPS Single-Channel ADC, LVCMOS Outputs The KAD5510P-25 offers better performance, lower power and a smaller package size than this device and is recommended for new designs.
	KAD2710L-10		10-Bit, 105MSPS Single-Channel ADC, LVDS Outputs The KAD5510P-12 offers better performance, lower power and a smaller package size than this device and is recommended for new designs.
	KAD2710L-17		10-Bit, 170MSPS Single-Channel ADC, LVDS Outputs The KAD5510P-17 offers better performance, lower power and a smaller package size than this device and is recommended for new designs.
	KAD2710L-21		10-Bit, 210MSPS Single-Channel ADC, LVDS Outputs The KAD5510P-21 offers better performance, lower power and a smaller package size than this device and is recommended for new designs.
	KAD2710L-27		10-Bit, 275MSPS Single-Channel ADC, LVDS Outputs The KAD5510P-25 offers better performance, lower power and a smaller package size than this device and is recommended for new designs.
	KAD5510P-12		Low Power 10-Bit, 125MSPS ADC
	KAD5510P-17		Low Power 10-Bit, 170MSPS ADC
	KAD5510P-21		Low Power 10-Bit, 210MSPS ADC
	KAD5510P-25		Low Power 10-Bit, 250MSPS ADC
	KAD5510P-50		10-Bit, 500MSPS Single-Channel ADC, with LVDS/LVCMOS Outputs