| |
|
|
| 8-Bit, 500MSPS A/D Converter |
| |
| |
|
|
 | ISLA118P50 | | 8-Bit, 500MSPS A/D Converter |
|  | | Resolution (Bits) |  | 8 | | | Conv. Rate (MSPS) | | 500 | | | Channels | | 1 | | | SNR (dBFS) | | 49.9 | | | SFDR (dBc) | | 68 | | | Power (mW) | | 428 | | | Supply Voltage (V) | | Multi (1.8 Anlg, 1.8 Dig) | | | Input BW (MHz) | | 1150 | | | Input VIN (Range) (VP-P, differential) | | 1.45 | | | INL (max) (±LSB) | | .03 (typ) | | | DNL (max) (±LSB) | | .02 (typ) | |
| |
| Key Features |
-
1.15GHz Analog Input Bandwidth
-
90fs Clock Jitter
-
Automatic Fine Interleave Correction Calibration
-
Multiple Chip Time Alignment Support via the Synchronous Clock Divider Reset
-
Programmable Gain, Offset and Skew control
-
Over-Range Indicator
-
Clock Phase Selection
-
Nap and Sleep Modes
-
Two’s Complement, Gray Code or Binary Data Format
-
DDR LVDS-Compatible or LVCMOS Outputs
-
Programmable Test Patterns and Internal Temperature Sensor
|
|
| Description |
The ISLA118P50 is a low-power, high-performance, 500MSPS analog-to-digital converter designed with Intersil’s proprietary FemtoCharge® technology on a standard CMOS process. The ISLA118P50 is part of a pin-compatible portfolio of 8, 10 and 12-bit A/Ds. This device an upgrade of the KAD551XP-50 product family and is pin similar.
The device utilizes two time-interleaved 250MSPS unit A/Ds to achieve the ultimate sample rate of 500MSPS. A single 500MHz conversion clock is presented to the converter, and all interleave clocking is managed internally. The proprietary Intersil Interleave Engine (I2E) performs automatic fine correction of offset, gain, and sample time skew mismatches between the unit A/Ds to optimize performance. No external interleaving algorithm is required.
A serial peripheral interface (SPI) port allows for extensive configurability of the A/D. The SPI also controls the interleave correction circuitry, allowing the system to issue continuous calibration commands as well as configure many dynamic parameters.
Digital output data is presented in selectable LVDS or CMOS formats. The ISLA118P50 is available in a 72-contact QFN package with an exposed paddle. Performance is specified over the full industrial temperature range (-40°C to +85°C). |
|
 iBuy direct from Intersil |  iBuy direct - out of stock |  Request samples |  Check distributor inventory |  Available in RoHS/Pb-Free | | | |
| Part No. | Design-In
Status | Temp. | Package | MSL | Price
US $ | | | | | |
|
| ISLA118P50IRZ |
Active |
Ind |
72 Ld QFN |
3 |
36.00 |
 |
|
 |
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| Datasheet(s): | | | Technical Homepage: | | | |
|
|
| Applications | - Radar and Electronic/Signal Intelligence
- Broadband Communications
- High-Performance Data Acquisition
|
|
| | KAD2708C-10 | | 8-Bit, 105MSPS Single-Channel ADC, LVCMOS Outputs | | | KAD2708C-17 | | 8-Bit, 170MSPS Single-Channel ADC, LVCMOS Outputs | | | KAD2708C-21 | | 8-Bit, 210MSPS Single-Channel ADC, LVCMOS Outputs | | | KAD2708C-27 | | 8-Bit, 275MSPS A/D Converter | | | KAD2708L-10 | | 8-Bit, 105MSPS Single-Channel ADC, LVDS Outputs | | | KAD2708L-17 | | 8-Bit, 170MSPS Single-Channel ADC, LVDS Outputs | | | KAD2708L-21 | | 8-Bit, 210MSPS Single-Channel ADC, LVDS Outputs | | | KAD2708L-27 | | 8-Bit, 275MSPS A/D Converter | | | KAD2708L-35 | | 8-Bit, 350MSPS Single-Channel ADC, LVDS Outputs | |
|
|
Related Devices
